What should I do if the impact crusher suddenly stops？

Time：2022-08-30 09:26:06 Share To

1. The voltage of the work site is too low and the stone cannot be broken, resulting in the car slamming. In this case, it is only necessary to readjust the voltage of the workplace. The eccentric shaft fixing bushing is loose, resulting in no gap on both sides of the bearing seat of the frame, so that the eccentric shaft is stuck and cannot be rotated, and the fixing bushing needs to be re-inst ed or replaced. 2. We consider that due to the harsh working environment and heavy workload, the bearing is seriously damaged, and the new bearing can be put into production again.
3. Because the belt of the drive sheave of the impact crusher is too loose, the belt slips due to the weak rotation. In this case, it is only necessary to replace the belt.
4. The viscosity of the material is high or the feeding speed is too fast, causing the discharge port to be blocked, resulting in a full warehouse and stuffy car. Clear the blockage of the discharge port to ensure the smooth flow of the discharge port in the future.