What is the harm of voltage instability to the impact crusher?

Time：2022-08-11 08:59:14 Share To

The impact crusher is referred to as the impact crusher, which is a crushing machine that uses impact energy to crush materials. The equipment adopts new manufacturing technology and structural design. The finished product is cubic, free of tension and cracks, and has good particle shape. It can crush kinds of coarse, medium and fine materials (granite, limestone, concrete, etc.), and is widely used in various ores. Crushing, railway, highway, energy, cement, chemical, construction and other industries. So, what are the serious consequences of the impact crusher if there is voltage instability in the production process? 1. Sudden shutdown occurs. The voltage of the work site is unstable or too low. When the main machine of the impact crusher encounters the large material, it is unable to crush, and the main machine s*s because the main machine cannot bear the excessive pressure.
2. Make the eccentric shaft stuck. If the working voltage of the impact crusher is unstable, it will cause the eccentric shaft adapter sleeve to loosen or f off, causing the frame to be close to the bearing, causing the eccentric shaft to be firmly stuck, and the eccentric shaft cannot rotate norm y, which will seriously affect the production. Therefore, if such a fault occurs in production, the voltage should be adjusted in time, and the eccentric shaft bushing needs to be re-tightened. If the eccentric shaft adapter sleeve is damaged, the eccentric shaft adapter sleeve needs to be replaced.
3. Cause material blockage. If the working voltage of the impact crusher is unstable, it will cause uneven feeding during production, and the amount of feeding is sometimes more and sometimes less. The crushed products cannot be discharged in time, and the materials are prone to blockage in the crushing cavity and discharge port. . Therefore, it is necessary to ensure a stable working voltage, and the discharge port should be checked frequently, and the blocked materials should be removed in time, which can effectively prevent the boring car failure.
4. Cause stuffy car phenomenon. The voltage instability will cause the tension of the transmission belt of the crusher to be high during operation, resulting in excessive belt loosening, belt slippage, and belt failure. boring car.