Features and working principle of ore circular vibrating screen

Time：2022-08-15 08:57:40 Share To

Ore circular vibrating screen is to divide various raw materials (such as ore, coal, stone, etc.) and various primary products (such as cement, salt, monosodium glutamate, etc.) It is a production equipment that can be removed for further processing and product quality improvement. So what are the characteristics and working principles of the ore circular vibrating screen? According to the structure and working principle of the ore circular vibrating screen, it can be roughly divided into the following categories:
1. The working part of the fixed screen is fixed, and the material is screened by sliding the material along the working surface. Ore circular vibrating screen is one of the * widely used in beneficiation plants, and is gener y used for pre-screening before coarse or medium crushing. It has a simple structure and is convenient to manufacture. No power consumption, the ore can be directly unloaded onto the screen surface.
2. The plane motion screen body is a plane swinging or vibrating. According to its plane motion trajectory, it is divided into linear motion, circular motion, elliptical motion and complex motion. Shakers and shakers f into this category.
3. The working part of the ore circular vibrating screen is cylindrical, the entire screen rotates around the axis of the cylinder, and the axis is gener y inst ed at a sm inclination angle. The material is fed from one end of the cylinder, the fine-grained material passes through the sieve holes on the cylindrical working surface, and the coarse-grained material is discharged from the other end of the cylinder.
4. The rotating speed of the ore circular vibrating screen is very low, the work is stable, and the power balance is good.
5. The working surface of the ore circular vibrating screen is composed of rolling shafts arranged horizont y. There are plates on the shafts, and the fine-grained materials pass through the gaps between the rollers or the plates. The bulk material is driven by the roller to move to one end and discharged from the end.