Jaw crusher installation needs to pay attention to which

Time：2019-09-04 14:34:08 Share To

Nowadays, many manufacturers have to pay for the jaw crusher. The jaw crusher may need to be inst ed by itself. So we need to understand the inst ation precautions, because if there is a bad inst ation, there will be many questionable.

1. Before the jaw crusher is inst ed, we need to carefully check whether the basic construction of the site is consistent with the design drawings.
2. The base of the jaw crusher should be fastened with cement. The soft soil is easy to make it move and loose during the production period. The inst ation should be as accurate as possible, stable, vertical and horizontal. Before inst ation, we need to carefully check whether the basic construction of the site is consistent with the design drawings.
3, adjust the discharge port to * remove the spring, adjust the size of the discharge port, and then tighten the spring to adjust the degree of relaxation, to maximize efficiency.
4. Under normal circumstances, the jaw crusher is the head of the whole production line, so it cooperate with other equipments. Therefore, we should consider the location and inst ation of other equipment during the inst ation process, and make good use of the site area. , to generate assembly line production, to maximize the benefits.
5. Before running the jaw crusher, manu y pull the pulley manu y to ensure that there is no abnormality, and that it can be operated after being blocked by external force. The empty car test machine needs to be kept for a period of time. If there is no noise, looseness, running position and oil leakage in the process, it proves that the inst ation of the jaw crusher is in place. Jaw crusher is the head of the whole production line, so it cooperate with other equipments. Therefore, we should consider the location and inst ation of other equipment during the inst ation process, make good use of the site area and generate assembly line production. profits.